Combustion Eficiency and Emissions in the Combustion of Biomass in Stoves

Autoři

  • E. Machnikova Department of Power Engineering, Faculty of Environmental Technology, Institute of Chemical Technology, Prague,
  • M. Koutsky Department of Power Engineering, Faculty of Environmental Technology, Institute of Chemical Technology, Prague,
  • F. Hrdlicka Department of Fluid Dynamics and Power Engineering, Faculty of Mechanical Engineering, Czech Technical University, Prague
  • J. Vosta Department of Power Engineering, Faculty of Environmental Technology, Institute of Chemical Technology, Prague,

Abstrakt

The paper presents mass and enthalpy balances in the combustion of biomass in stoves. The first part of the paper concerns the biomass as an alternative source of energy, the combustion processes, formation of emissions and the method of calculation of mass and enthalpy balances. In the second part, experimental data are presented involving four types of fuels: foliate pellets, mixed pellets, "American" pellets and sludge pellets of the bituminous coal type. The efficiency of the stove was calculated for all the fuels using mass and enthalpy balances. In addition, analysis of products of imperfect combustion, such as CxHy, volatile organic compounds, persistent organic pollutants (polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polychlorinated dibenzodioxines and dibenzofurans) was performed.

Stahování

Publikováno

15.04.2003

Jak citovat

Machnikova, E., Koutsky, M., Hrdlicka, F., & Vosta, J. (2003). Combustion Eficiency and Emissions in the Combustion of Biomass in Stoves. Chemické Listy, 97(3). Získáno z http://blog.chemicke-listy.cz/ojs3/index.php/chemicke-listy/article/view/2247

Číslo

Vol 97 No 3 (2003)

Sekce

Články

Nejaktuálnější články stejného autora (stejných autorů)