Methods for Evaluation of Affinity of Bitumen to Aggregate

Authors

  • P. Daučík Department of Petroleum Technology and Petrochemistry, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Bratislava, Slovakia
  • M. Hadvinová Department of Petroleum Technology and Petrochemistry, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Bratislava, Slovakia
  • E. Hájeková Department of Petroleum Technology and Petrochemistry, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Bratislava, Slovakia

Keywords:

phase affinity, bitumen, aggregates

Abstract

The purpose of the study was to compare techniques related to a laboratory method for determination of affinity of bitumen to aggregate. The standard method EN 12697-11/AC was used for the purpose. Three methods can be used: the rolling bottle method, static method and boiling water method. Visual, photographic and extraction evaluation of stripped surface on aggregate after the rolling bottle method was used and compared. The static method showed submarginal differences among modified bitumen. The boiling water method showed the best repeatability in evaluation of stripped surface by acidimetry. The acidimetric determination of the affinity is recommended for the bottle rolling method instead of visual evaluation. Polymer modifiers as additives affecting the affinity were also compared.

Downloads

Published

2012-12-15

How to Cite

Daučík, P., Hadvinová, M., & Hájeková, E. (2012). Methods for Evaluation of Affinity of Bitumen to Aggregate. Chemické Listy, 106(12), 1134–1139. Retrieved from http://blog.chemicke-listy.cz/ojs3/index.php/chemicke-listy/article/view/804

Issue

Vol. 106 No. 12 (2012)

Section

Articles